Are you frustrated by misaligned, bumped, and scuffed cabinet doors and drawers? Adjusting cabinet doors and hinges is one of the cheapest and easiest solutions. Even homeowners can take good care of this annoying daily problem.
While adjusting cabinet doors and drawers is an important step during installation, you may need some adjustments occasionally. Cabinet drawers are subject to contraction and expansion. Additionally, the weight of the drawers also changes.
So, how do you adjust cabinet drawers and doors? Continue reading the article to learn more about it.
Simple steps to adjust closet drawers:
When you notice that your cabinet drawers need repair, make adjustments by following the below steps. The process is simple; you only need a flashlight and a screwdriver.
Find out what you should do with the drawer face. For example, do you want the left side of the drawer to be slightly up?
Remove the box from the drawer by releasing it from the guide.
Next, adjust the tabs. While you can find them in different places, it is usually located at the bottom of the box.
Now, check how the tight drawer fits into the cabinet by placing it back correctly. Find out if the adjustment was effective. Repeat the steps if you think you need more adjustments.
However, some drawer slides have more adjustment points and are responsible for controlling the tilt of the drawer box. The adjusters are mounted to the cabinet box on the slides’ back.
If you want to adjust the tilt, remove the drawer box. As you remove it, you will find the mounting clamp that moves along with it. The back of the drawer tends to lift when the bar goes up. Adjusting the tab, you can easily make the drawer tilt left or right or back and forth.
Diagnose The Problem With The Closet Doors:
The first thing you can do is find out why the closet doors do not close smoothly. Closet doors take constant abuse, and problems can take several forms. The wood of the cabinet door may have warped over time; the hinges may be rusted or may have become loose.
Examine the hinges and doors inside and out. Check for binding or rubbing. Fixing the loose screws or replacing them with better hinges could solve the problem. If you notice rubbing, overlapping, or snagging, mark the edges responsible for the cabinet door not closing.
The last step is to remove the door and look for signs you haven’t found before. It gives you an idea about the outside and inside of the boxes for any signs of wear and tear that you may have missed before.
Adjusting Cabinet Doors Not Closing:
Adjusting a rubbing cabinet door – When the door rubs against each other while closing, you should try adjusting the hinges. Locate the two screws on the hinges. Make small turns on the screw near the door and adjust the position left and right. Solve problems related to friction.
Fixing Cabinet Hinges That Won’t Close – Door hinges allow you to adjust differently. Right and left adjustments are discussed above. To adjust them up and down, slightly unscrew the base plate where the hinge locks and move the doors until they reach the top and bottom levels.
To make the cabinet doors closer or closer to the box, use the screw away from the doors, not the ones used to adjust to the right or left. However, remember that no hinge is immortal but can be adjusted. Additionally, they wear out over time and may need replacement.
Adjust an Overlapping Door – When a cabinet door overlaps when closed, adjusting the hinges can solve the problem. However, if the problem remains, you may need to replace the hinges or doors or look for Thermofoil Cabinet Door Repair services to help.
In Conclusion
It is up to you to decide whether to repair or replace the cabinet doors and drawers along with the hinges when you have problems. You can try some of the methods described above or call experts like Kitchen Cabinet Guys for example.
