How To Keep Your Swimming Pool Clean

Some people have the impression that keeping your swimming pool clean is tough because you need chemicals and machines to do a good job. This is not always true because you can easily clean your pool using some basic equipment. It is just a simple matter of creating the time and making the effort. Below are simple ways to keep your pool clean.

Skim the Surface of Your Pool

You need a flat skimmer net to do this properly. Just dip the net into the surface of the water and move it around until you have covered the perimeter of the pool. This skimmer will help you get rid of leaves, bits of plastic and other debris floating on the surface of the pool. To keep your pool super clean, you need to do this at least three times a week.

Brush Around the Pool

To do this the right way, you need your telescopic pole and brushes. This pole will help you clean the sides, the floors, stairs and ladders of the pool. As you clean the floors, you might encounter some grime that is difficult to remove. Now, you don’t have to give up at this point. Just apply more force and you will get rid of all the stubborn dirt on the floors of your pool. You can do this once a week or even twice a week if you can find the time.

Vacuum the Bottom of the Pool

You have found debris on the surface of the pool so it is likely you will find even more debris at the bottom of the pool. To get rid of dirt at the bottom of the pool you should vacuum the pool. If the pool is not too dirty, a manual vacuum cleaner will do. However, if the pool is very dirty, a mechanized vacuum cleaner will do a better job. For best results, you should vacuum the floor of the pool at least once a week.

Clean the Pool Filter

Once you are done with the surface of the pool, you should take a look at the pool filter. Remove all the dirt and other things that may be clogging your filter. If you are not happy with the filter after cleaning it, you can simply replace the filter.

Test the pH Level

If you are sure that the pool is clean and there are no solid impurities in it, you can test the water’s pH level. Note that the right level should be between 7.1 and 7.7. depending on the results of the test, you can reduce or increase the pH level. Do these three to four times a week and your pool will be safe.

Add Chlorine Tablets

Now, your pool is almost good but there is one last thing you should do. Add chlorine tablets to sanitize the pool and it will be almost perfect. Use the right methods to do this and always follow the instructions carefully. This is how to clean a swimming pool.

If you are considering an installation of a pool at your home, visit this Austin pool builder today.