While tankless water heaters are believed to last for more than a decade, they are not immune to the effects of rust for all that long, right? However, the thought of maintaining your water heater means you would at times risk your life with gas and electricity, in the garage. It would also mean you will be handling something you’ve probably never had in your house again. But don’t worry, we have tips for you.
Tip 1: Clean the filter regularly
A good tankless water heater (compare the best tankless water heaters here) should come with a water filter to trap sediments and dangerous minerals from getting to you. However, if you want your tankless device to stay up and running all the time, ensure you at least clean its filter once in six months. And if you use water from boreholes or dams, you might want to inspect the in line filter more often and remove the trapped debris. This makes you water heater operate smoothly without getting affected by anything.
Tip 2: Check for mineral deposits
Generally, tankless water heaters do not hold a lot of mineral deposits in them. However, the little mineral deposits that attach themselves in there do hinder its operations in the long run. But you may ask what if you can’t clean out the mineral deposits on your own? Well, these days there are many professionals specialized in maintaining and cleaning tankless devices. They can help clean out the lime scale, calcium and magnesium deposits in your water heater. Besides, note that most tankless water heaters won’t last the many years they are supposed to if you can’t maintain them.
Tip 3: Dealing with freezing weather condition issues
You probably know that water heaters are vulnerable to cold weather conditions. They are not indestructible after all. The worse part however is the fact that you can’t get hot water if your heater has to deal with too cold temperatures in your garage. So, what should you do? To start with, check the freeze protection instructions from the manufacturer’s manual. Check if your device is fitted with an internal heater that helps raise too cold water to ideal temperatures. Note that if you don’t take measures to protect your device against freezing, its pipes, joints and the device itself could get damaged and as a result fail permanently. The best maintenance option however is to install your water heater with insulation materials to give it warmth when the ground temperatures get too cold.
Tip 4: Dealing with a Gas model Tankless water heater
Gas powered tankless water heaters require a lot of regular checkups. Earthquakes do happen, remember? In addition, a simple dislodging of the pipes that leads to your water heater could turn catastrophic if not dealt with at an early time. Fortunately you can regularly check for gas leaks by spreading soap dishes over the pipes and watching out for bubbles. Okay, consistent bubbling indicates danger, so call a professional immediately you see them.
Tip 5: Correcting a Vent drip
For people who use direct vent heater system, you may have probably heard that your heater has a U-shaped loop to hold excess water from the heater. It should always have some water trapped in it if your heater is working accordingly and efficiently. You can check it out since it is U-shaped, and if it looks like there is an anomaly in it, call a plumber to fix it immediately or risk damaging your device.
Ways to troubleshoot your Tankless Water heater
Here is how you can solve the following common problems with modern tankless water heaters.
Can’t get Hot Water
One reason why your tankless device may not be working accordingly is because its burners do not ignite when you turn on the cold water pipes. It could be an electricity blackout issue, the flow sensor could have worn out, or there could be dirt buildups in there. For an electricity related problem, check if the circuit breaker keeps tripping frequently. In such a case, call a professional plumber immediately. On the other hand, if the pilot light doesn’t light up, call a professional over as well.
You get lukewarm water
It is common to get a water heater fluctuating between lukewarm and hot water. Sometimes it could be that your home’s underground conditions are too low, or it could be a water heater related issue like a poorly set thermostat. In the case of cold temperatures in your garage, try and insulate the device by wrapping it with insulating materials. Alternatively you can install an internal heater to help raise cold water when it is too cold. On the other hand, if the device still fluctuates between hot and cold water after trying to fix it, call a professional plumber.
Walk the talk you have always meant by saying you want your house to “go green.” Tap on all resources in your home that could bring down your energy costs and replace all appliances that consume much of your energy bills. After all who doesn’t want to save money anyway? Stick with me in the article below as we highlight all the possible things you can do to make your house more energy efficient.
Quit all Energy wasteful Habits
Do you have habits that could be increasing your average energy costs? How about you start switching the lights off when you are outdoors? If you live alone, check if you boil more water than you use. These are the bad habits that could be the difference between paying an extra $50 and saving that amount in the next month. There are many other poor habits the average American have and quitting them could all make a big difference when it comes to saving on energy bills.
Tap on Solar Power
If you come from state plentiful of the Sun, installing a few solar panels could help you save hundreds in energy bills per year. Using solar power on your hot water systems for instance could greatly increase energy efficiency in your home. Besides, solar power is very clean, readily available and affordable to all.
Invest in Wall and Attic Insulation
Proper wall and attic insulation slows down energy loss during the winter while it reduces unnecessary energy consumption during the summer. With good insulation, your house stays warm when there is cold outside, and stays cool when it is too hot. Besides that, your energy costs go down, thus making it an all win situation. Note also that any type of walls can be insulated, including those with a few cavities here and there. However it is important to call a professional energy auditor over to your home to help you get a proper assessment of the type of things you need to invest in the most.
Replace your Furnace with an Energy star rated one
Some people still sue their 1990 made furnace. If you also have one built around that time, know that you spend about 35% more energy bills than other people. Replace that old furnace and other energy wasting appliances with devices that have an energy efficiency rating of about 90%. But if you are not sure which devices waste more energy in your home, call a professional over to do the assessment. It pays to install energy efficient appliances in your home after all. And better yet, modern energy star rated devices last longer than the traditional appliances.
Change your Water heater if you have to
These days, people are choosing to pay more just to get the highly rated tankless water heaters. In case you haven’t heard about them, they utilize the lack of a tank to save you a couple of a hundred dollars every year on energy bills. They are also very durable, so more about them to see if they fit your expectations. Other than that, you may choose to spend less and insulate your hot water lines which would still bring your energy bills down by a significant amount. In addition, other simple installments like low-flow shower fixtures, and close down any other loops that would be contributing to higher energy bills in your home.
Install Compact Fluorescent bulbs all around your home
In can descent light bulbs are by no doubt high energy consumers. In fact, most of them consume around three times the amount of energy simple fluorescent bulbs do. When you also calculate the service life of the CFL bulbs versus the fluorescent tube bulbs, the latter bulb types offer you more value for your money. Usually, a good light bulb should not consume more than 50 watts under any circumstances. If possible go for the simple light bulbs that consume around 30 watts if you want a more energy efficient home.
Upgrade your windows
Old and leaky windows will often affect heat distribution in your house. They could also interfere with the efficiency of your air purifiers and humidifiers; all cases which could lead to higher energy bills and less efficiency in our house. However, don’t really replace your windows yet, it would be cost ineffective. Instead, identify the problems with your windows to fix them. On the other hand, you can add good landscaping behind your house and especially near the windows to help better interior air circulation as well as add aesthetics to your home.
Finally, while doing everything possible to reduce energy wastage is the way to go, don’t forget about water efficiency in your home. Install a water filter for instance and upgrade your plumbing to ensure your home is even more energy efficient.
Choosing a flooring type is more than simply picking a good looking flooring material and installing it. It is often a daunting task where you have to spend time deciding on the many materials you can pick from, the place in your home you want to install and other considerations such as your budget. But in the end this little project could greatly increase your home’s value. However, with a simple guide like the following, choosing your flooring type could be much easier and less expensive than you could probably have ever imagined.
Factors to Consider
Where will you install the flooring?
Before you even decide on the materials to buy, consider the amount of moisture present at your intended place of installing the new flooring. In addition, consider if you are doing a full home flooring upgrade or is it just the basement. For the most durable option, go for a flooring type that can survive both medium and high moisture environments. So, what flooring options survive in high moisture areas? Stick with me for the next few minutes and you will learn it all.
Costs and Durability
You probably already know how important good flooring is to a home. But what if you don’t have the huge budget to buy high end solid wood flooring? Know your budget before you fall in love with any type of flooring. However, durability must always come to mind irrespective of how limited your budget is. Be prepared to spend some extra cash therefore so that you end up with a flooring type you will be proud of for decades.
As you go online to check out the different types of flooring and their maintenance costs, also have your home’s floor measurements with you. It is important to be fully conscious about all factors you will have to consider before you can install flooring in your home. Knowing your home’s floor measurements help you know the budget and the options you have. Knowing other factors like wood is easy to maintain but more prone to termite attacks is also important.
Style and Preferences
What style do you love? Would you rather tolerate cold concrete but enjoy the shining looks of tiles installed onto it or do you simply love plain wood? If your house is well lit and feels spacious, I bet you would be more willing to buy a flooring type that reflects that side of you. But if you don’t know whether a flooring type will reflect the bright interior of your house, you can simply order for samples online and test them in your home.
While many other factors like color, inspiration and finish touches are equally important facts to put into consideration, the above highlighted factors are the most important things to consider. However, you definitely do need to know the different types of flooring available to you, their pros and cons, their costs and reasons why each type of flooring fits different types of home. Continue reading to learn more.
Hardwood is by far one of the most common types of flooring. It has been a people’s favorite since a long time ago, it is till is and will probably be in the future. Thanks to the wide availability of hardwood flooring types, the fact that it is all natural and makes your home feel warm, there are many reasons you should also consider installing it. If you have a good budget, installing oak hardwood flooring can give you and edge when it comes to durability. There are also different exotic types of hardwood flooring, and there are easy to install as well.
If you have a thing for nature, how about you try a few samples of bamboo flooring in your house? Bamboo is soft, beautiful and could be quite durable if you buy the right type. Bamboo is also resistant to contractions and swelling. And since it only takes about five years for bamboo trees to reach maturity, its flooring isn’t as expensive as tiles.
Laminate is an inexpensive and very popular flooring choice around the world. Laminate is basically layers of different wood-based materials, but well finished with a grain photographed imprint for aesthetic purposes. There are different types of laminate floors, such as engineered wood and real hardwood. Laminate can really make your house look good even though at times it could be prone to scratches.
Porcelain tile is the most ideal type of flooring for many Americans with a medium or high budget. Porcelain combines the beauty and durability of stone, thus making better than granite or marble tiles. The good thing with tile is that you can add creativity to it by mixing your different styles and colors for a more appealing and unique flooring looks.
Finally, be sure to check out the very value conscious vinyl flooring, strong and reliable concrete or the beautiful Linoleum types of flooring before making a final decision on what to buy.